The Linksys RE4100W is one of the latest dual-band wireless range extender that functions on both 2.4GHz and 5 GHz frequencies at the same period of time. You can go for Linksys RE4100W extender setup to extend your existing wireless network coverage area to eliminate the dead Wi-Fi spots.
Setting up and configuring the Linksys range extender is made easy and fast with the built-in setup program. Before initializing the actual set up, you need to understand the following details of your currently active wireless network:
But somehow due to some technical or human failure, some of the users meet up with the Linksys extender setup failure. There might be many reasons behind this but majorly there are four common reasons.
1. Cannot get connected with your Linksys extender.
2. Cannot access your Linksys range extender.
3. WiFi coverage isn't meet the expectations.
4. Intermittent connection problems.
Cannot Connect with Your Linksys WiFi Range Extender
Firstly check the position of your existing router and extender device.
If you are trying to connect with WiFi protected setup, wait till the WPS indicator stops blinking before trying to make it connect again with your WiFi router.
Cannot Access Your Linksys Range Extender
To access your Linksys extender, you must be properly connected with your own home network. If you currently have some sort of wireless Internet access, the issue may be that you have might have connected to a different wireless network.
To fix the Windows OS problem follow the steps:
To fix the MAC OS, follow the steps:
Wi-Fi Coverage Does not Meet as Expected
Try to reposition your antennas after finishing up with the Linksys RE4100W extender setup. Move your WiFi extender's left antenna in the horizontal plane to extend your network. The ideal position is pointing straight down, parallel to the Linksys range extender.
Move your right antenna in a vertical position to extend your network i.e. perpendicular to the range extender. If still there is no improvement in the range extender WiFi coverage area try to reset your range extender. Visit extender.linksys.com, then login in your range extender and try to reset the configuration.
Intermittent Connection Problems
Place your range extender in the midway between your current router and the area with less or no WiFi network. Be sure that you have at least 50% of your existing WiFi signal at the point on the extender used for setup.
We hope that our this particular article section on overcoming the Linksys RE4100W Extender Setup Failure has stood on its perspective and proven quite fruitful for you. Somehow if you still have confusion, doubt, or query related to Linksys WiFi range extender. Feel free to get in touch with us through comments. We try to provide you with the best assistance.