123hpcomoj4650

HP OfficeJet Pro 8710 printer wireless setup in Windows:

First Time Printer Setup
1. To achieve the 123 hp com setup remove the printer out of its packing. Check the package for all the list of items
2. Raise the lid of the scanner and remove the packing tape around it
3. Tape and packing material from the cleanout area and ink cartridge access area should also be removed
4. Remove the sticker on the 123 hp com ojpro 8710 printer’s control panel
5. Remove the packing tape from the paper tray door by extending it and push the paper tray forward until it clicks
6. Turn on the printer by plugging it into a power source and set Preferences
7. To fully configure the 123 hp com setup press the down arrow on the control panel to select the language
8. Then press the down arrow to select to Set Country/Region
9. Press Yes after each action
10. Pull out the paper tray and the tray extender to load the paper
11. The slider width guides can be adjusted to their outermost positions
12. After loading and aligning the paper, push the paper tray forward till it clicks into place
13. The ink cartridges have to be loaded through the access door which is raised and locked into place
14. As the door is raised, the carriage automatically moves to an accessible position
15. The carriage has to be idle and silent for the (123 hp com setup) setup to continue
16. After taking the cartridge out of the package, remove the plastic tape from the top of it without touching the ink nozzles
17. Lift the lid of the ink cartridge slot, press the cartridge in till it snaps into place
18. Repeat the action for other ink cartridges and close the lid to secure the cartridges in their places
19. Close the access door of the print cartridge and align the cartridge according to the instructions on the control panel
20. After alignment of the ink cartridges the printer prints an alignment page.

For further explanation call us @+1-888-597-9290 or visit our blog https://www.123hpcomoj4650.com/123-hp-com-setup-8710/